EQN 1325

Rotary encoders with integral bearing Distinguishable revolutions: 4096 Positions per revolution: 8192 Data interface: EnDat01 synchronous serial EnDat 2.1 with Incremental, mode commands, command set EnDat 2.1 or 2.2 Output code: Dual Line count: 2048 Output signal: 1 Vpp ~ Cut-off frequency (-3 dB): 400.00 kHz Power supply: 3.6 V ... 14 V Coupling version: without coupling Shaft: 1:10 taper shaft, functional diameter 9.25 mm, Off thread M6 and M10 Degree of protection: IP 40 (EN 60529) Working temperature: -40 / + 115 ° C Electrical connection: Plug, straight, two-row, 12-pin, with Latches and side walls Output Configuration: D323746 Connection direction: cable output usable axially and radially Additional part: Mounting Kit with intermediate plates and central screw Special features, rotation encoders: no