STANDARD VALVING MACHINE FOR GAS CYLINDERS

wall mounted as standard - helical geared motor - telescopic shaft with standard valve wrench type M131-729 with 3 exchangeable inserts. Will fit cylinders without fixed valve guard. - clamping device with pneumatic-air cylinder, rubber covered clamp grips - electric control panel. - mesh guard with sliding door and safety interlock, opening 600 mm - chain and chain wheels for remote torque setting from floor level (M103-120-000) - position indicator (M103-112-000) - Torque range: 140-500 Nm (at 60 Hz 140-447 Nm). Torque below 140 Nm may require an additional torque limiter or a special made valving machine, subject to trials, not included in this offer. - Precision: +/- 10% - Power, electrical: 1,5 kW / pneumatic: 6-8 bar (87-116 psi) - Speed 30 rpm at 50Hz (36 rpm at 60 Hz) - Voltage 3 phase 400V (other voltage on request) - Dimensions: front 1400 mm x side 550 mm (43,30 x 21,65 inch). Weight: 260 kg (529 lb). - Cylinders less than 630 mm (24,8 inch) in high requires a small cylinder stand M103-827 or a small cylinder lift M103-122. Not included unless priced separately. Other specifications per catalogue. GAS CYLINDER DIMENSION: - Length of shortest cylinder (without cap or valve): 630 mm. - Length of longest cylinder (without cap or valve): CUSTOMIZED - Cylinder diameter capacity M126 clamping device: 100-310mm - Valve wrench M131-729 with spanner jaw gap: CUSTOMIZED - Total machine height CUSTOMIZED Optional fittings for the valving machine, not included in this quotation: M103-827-000 SUPPORT FOR SHORT CYLINDERS. The support is fixed in height. M103-122-000 LIFTING DEVICE FOR SMALL CYLINDERS, for cylinders shorter than 630 mm M131-425-002 VALVE WRENCH with torque limiter, for torque value below 140 Nm M103-116-000 STAND / SUPPORT for a free standing valving machine, fixed M103-116-484 STAND / SUPPORT for a free standing valving machine mobile on wheels M103-618/M374 Valving machine with EXPLOSION PROOF electric motor M103-308-000 LIFTING- AND LOWERING DEVICE M103-589-000 Additional SAFETY GUARD with 8 mm transparent Polycarbonate lining M131-713-000 SPECIAL VALVE WRENCH to valve LPG cylinders with fixed valve guards M125-644-xxx SELF-CENTERING CLAMPING DEVICE M103-650-112 SECOND LIMIT SWITCH for cylinders with fixed valve guard M568-003/4 Electronic torque control