Microscopy camera Axiocam 305 colour R2 (D)

Microscopy camera incl. driver software 64-bit, USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR cut filter Hoya C5000 (coated) Number of pixels: 2464 (H) x 2056 (V) = 5.07 megapixels colour Sensor type: SONY IMX264 Exmor Pregius Global Shutter CMOS Pixel size: 3.45 μm x 3.45 μm Chip size: 8.5 mm x 7.1 mm, corresponds to 2/3_ (diagonal 11.1 mm) Spectral sensitivity: With IR cut filter approx. 400 nm to 720 nm Max. charge quantity per pixel:Approx. Charge quantity per pixel:Approx. 10,500 e Full Well Capacity Selectable resolution: H x V binning factor 2464 x 2056 1x1 Basic resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 H x V subsampling factor 2464 x 2056 1x1 base resolution 1232 x 1028 2x2 Live frame rates (depending on hardware and software configuration) H x V frame rate@1ms 2464 x 2056 36 fps 1232 x 1028 88 fps (2x2 subsampling) Frame rates for time lapse recordings (depending on hardware and software configuration): H x V(ROI) Frame rate 2464 x 2056 36 fps 2048 x 2048 36 fps 1920 x 1080 67 fps 1024 x 1024 70 fps 512 x 512 136 fps 256 x 256 255 fps 128 x 128 456 fps Readout of sensor sub-ranges (_ROI_): Freely definable Digitisation: 8 and 12 bit / pixel Dynamic range: Typically > 4800 : 1 (>73 dB) at typ. 2.2 e Readout noise Readout noise Dark current: < 1.0 e/p/s @ 25°C Integration time: 0.1ms to 4 s Cooling: Temperature stable at 25°C for ambient temperature from 18°C to 30°C Status LED Camera: colour-coded display for operating status, dimmable Interface: USB 3.0 Optional operation on USB 2.0 at reduced frame rate Optical interface: C-mount Lens penetration: Max 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 4.3 cm / 580 g Housing: Blue anodised aluminium with cooling fins on top of housing, 1/4_ photo thread connection Approvals: CE Power supply via PC: Max 4W, USB 3.0 cable for camera electronics Ambient conditions: +5° ... +35° Celsius, max. 80% relative humidity, non-condensing, free air circulation required. Supported operating systems: for ZEN: Windows 10 x64 Supported application software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The necessary application software is available free of charge on the ZEISS Download Center.