Helical geared motor R57 DRN80M4/AL

Drive similar to data from previous delivery with serial number: 01.1947040810.0001.14 However, with motor from our current motor series “DRN...(IE3)”. Please check to see if it will fit you. z. e.g. extra length motor 15 mm, speed new 39 rpm (old 38 rpm) Speed 50Hz [r/min]: 1440 / 39 Total transmission ratio [i]: 37.30 / finite Number of teeth numerator / denominator: 2387/64 Ma max [Nm]: 450 Output torque 50Hz [Nm]: 186 Service factor SEW-FB: 2.40 Design IM: M5 Position of terminal clamp. [°]/cable insertion: 270 (T) / normal Oil manufacturer designation: Mobil SHC 629 Lubricant / quantity [l]: CLP HC 150 synthetic oil / 1.70 Corrosion protection: Yes Surface protection: OS2, according to technical data sheet 01802__94 Paint finish: Top coat RAL7035-light gray glossy Test certificate: Create test certificate 2.2 according to EN 10204 Gearbox: R57 Output shaft end: 35x70mm lg. Output shaft version: with keyway / with feather key Venting variant: Standard Delivery condition: Bleeder valve fitted Motor: DRN80M4/AL Flange material (motor): Gray cast iron (GG20) Motor power [kW]: 0.75 Motor frequency [Hz]: 50 Duty cycle S1-S10: S1 Voltage range [V]: 220-230 delta/380-400 star Rated current [A]: 3.05 / 1.75 cos phi: 0.74 Thermal class [°C]/protection class [IP]: 155(F) / 55 International efficiency class: IE3 Efficiency at 50/75/100% Pn [%]: 80.7 / 82.9 / 82.9 CE mark: Yes Ambient temp. motor [°C]: -40..60 Ventilation: AL = metal fan Fan cover: Metal fan cover Terminal box: Lower part of terminal box made of ALU with threaded hole 2xNPT 1/2”