Pneumatic control valve Type 3241-7

Functional certificate: 3.1 to DIN EN 10204; Material certificate for pressure-bearing and pressure-retaining parts: 3.1 to DIN EN 10204; Nominal size 9001TEST: NPS 2; Test group: Actuator; Hydrostatic strength test: ANSI/ISA 75.19.01; Test pressure hydrostatic strength test: 30.0 bar; Test duration hydrostatic strength test: 1.00 min; Seat leakage test: ANSI/FCI 70-2 leakage class IV, test medium gaseous, test method type A; Test pressure seat leakage test: 4.0 bar; Leakage test to the outside with air: DIN EN 12266-1, test P11; Test pressure Leakage test to the outside with air: 5.0 bar; Function test: DIN EN 60534-4; PMI test during assembly: PMI seat, plug, plug stem, body, bonnet, optional intermediate piece; Labelling: Additional; Labelling actuator: 1.4301 nameplate fitted. 1x Type 3241 globe valve Standard: ANSI; Nominal size: NPS 1½; Nominal pressure: Class 150; SPSL (SAMSON Product Specification Level): SPSL 1; Body material: A352 LCC; Body connection: Flanges; Body connection type: RF (Ra 3.2...6.3) ASME B16. 5; Characteristic: Equal percentage; Flow direction: Open (FTO); Flow coefficient Cv: 30; Flow coefficient Kvs: 25; Leakage class: IV; Sealing edge plug: Metallic; Plug material: A351 CF3M/A182 F316/A182 F316L/A479 316/A479 316L; Plug stem material: A479 316 / A479 316L; Seat material: A182 F6a Cl. 2/A276 410 T; Seat sealing edge: Metallic; Stroke: 15 mm; Valve bonnet: Insulating section (IT); Bonnet material: A352 LCC / A350 LF2 / A350 LF2; Body gasket material: Graphite sealing ring with metallic carrier 1. 4401/1.4404; Packing: PTFE; Packing type: Standard; Packing spring material: 1. 4310; Connection diameter: Ø 30 mm; Fail-safe position for actuator: opening and closing; Seat bore: 38; Assignment base: Steel: Valve BA 240 less or equal DN 150/NPS 6 with NAMUR ribs; Valve/actuator size: globe valve DN 50 to 100/NPS 2 to 4; Coating system: 03a Corrosivity category C5 and high duration of protection; Test certificate for coating: 2.2 Factory certificate acc. to DIN EN 10204; Supplementary material requirements: Protocol 00333 1x Type 3277 Pneumatic Actuator Operating stroke: 15 mm; Fail-safe position: Closing; Actuator area: 120 cm²; Spring assembly: Standard spring assembly; Actuator connection: SAMSON; Diaphragm material: NBR; Actuator housing material: Die-cast aluminium; Actuator control medium: Air; Special marking: Stainless steel nameplate (1.4301); Material of connecting clamps: 1. 4301; Actuator bench range: 1.4 to 2.3 bar; Actuator operating range: Corresponds to bench range; Actuator stem material: Stainless steel; Actuator type: Pneumatic; Actuator version: Type V1; Actuator travel: 15 mm; Exhaust air connection quantity: 1x; Ambient temperature range: -35...90 °C; Coating system: 03a Corrosivity category C5 and protection duration high; Test certificate for coating: 2.2 Factory certificate according to DIN EN 10204. 1x i/p positioner type 3731 Device type: 3731-3, with LCD, HART communication, 4...20 mA, AUTOTUNE; Ex approval: IECEx; Ex marking: Ex d IIC T6/T5/T4 Gb; Ex d e IIC T6/T5/T4 Gb; Ex tb IIIC T80°C Db IP66; Switch-off behaviour: 3.85 mA; Diagnostics: EXPERTplus; Electrical connection size: M20 x 1.5; Housing material: Aluminium; Ambient temperature range: -40. ..80 °C; Slip clutch: With; Hardware: Device index 03; Firmware: 1.61; Communication: HART®; Electrical connection type: Thread; Electrical supply: 4 ... 20 mA; Kvs outlet: 0.15; Kvs inlet: 0.09; Pneumatic connection type: ¼ NPT; Safety approval: SIL 1x mounting unit for Type 3731 Mounting: 3277-5, FA/FE, with external piping; Mounting unit: ¼ NPT, consisting of:; Mounting kit: Type 3277-5, 120 cm² (1400-7452), with sub-base (1400-6823) and signal pressure restrictor (1400-6964), paint-compatible; Connection block / sub-base: Pressure gauge mounting block ¼ NPT, aluminium (1400-7459); Pressure gauge: 2 pressure gauges, housing, 1. 4404, with DAE (1402-1637); Pipework: Metric CrNiMo, screw connection Ermeto or comparable, CrNiMo 1x attachment 4708 Device type: 4708-13 freely pipeable; Set point range: 0.5 ... 6 bar; Housing material: 1.4404; Filter bowl: Stainless steel; Ambient temperature range: -25...70 °C; Pneumatic connection type: 1/4 NPT; No. of pressure gauges: 1; Pressure gauge: Pressure gauge stainless steel / brass; Pressure gauge scale: bar and psi; Pressure gauge thread: With G 1/8 connection; Filter pore size: 20 μm; Kvs outlet: 0.1; Kvs inlet: 0.1 1x mounting unit 4708 Device type: 4708-13 freely pipeable; Mounting unit: consisting of:; Attachment: Attachment to actuator, elbow AISI 316L, 1402-0157; Pipework: Metric CrNiMo, screw connection Ermeto or comparable, CrNiMo. 1x solenoid valve type 3963 Ex approval: ATEX; Ex marking: II 2G Ex ia IIC T6 Gb; Electrical supply: 24 V DC; Switching function: 3/2-way; Attachment: Threaded connection; Kvs outlet: 0.32; Kvs inlet: 0.32; Pneumatic connection type: ¼ NPT; Supply air: External; Body material: 1. 4404; Electrical connection type: Plastic cable gland; Electrical connection size: M20 x 1.5; Electrical connection colour: Blue; Protection rating: IP 65; Ambient temperature range: -20...80 °C; Safety approval: SIL 1x mounting unit for type 3963 Mounting: Mounting bracket; Mounting kit: Mounting bracket (0300-1444); Pipework: Metric CrNiMo, screw connection Ermeto or comparable, CrNiMo 1x Hook Up Wiring diagram: 0507; Thread type: NPT thread; Tubing: Metric; Tube material: 316/316L; Fitting: Ermeto; Fitting material: Stainless steel 316