ABUS column swing crane VS

Load capacity 2000 kg Projection 6000 mm Height 5689 mm Lacquered in color RAL 1007 daffodil yellow 1 component synthetic resin Painting (1) - 70 my Calculation basis DIN 15018 Crane classification H2 / B3 Place of operation Halls Frame size / boom profile VS558 / IPE 500 Height of bottom edge boom 5129 mm Operating voltage 3 / PE ~ 50 Hz 400 V Control type direct control Protection class IP55 Pan range, nominally n times 360 ° Swivel two-stage (pole switchable) 0.15 / 0.61 rpm Swing output 0.11 / 0.45 kW Mechanical swing limitation: Restriction of the swivel range by two swivel stops. The Stops can be screwed in a 15 ° grid. Of the Swivel range can be set from 0 ° to 255 °. Trolley power supply: Drag cable, cable gland approx. 800 mm, With flat cable, which is transported by means of a cable car in a separate running rail Galvanized track, connector, rail holder and Fastening panels. Mains connection switch 3-pole (for cranial column, lockable) included contain. Not included in the delivery: - the mains cable on the hay side to the mains connection switch and the Installation of the connection cable - Installation of the mains connection switch Operation of a hall using a hanger: The hanger is fastened along the trolley. Manufacturer: ABUS Length of the control cable, incl. Cable tray: 3640 mm Control line calculation according to the height of the bottom edge of the carrier profile ABUS electric chain hoist: Chain hoist type GM 6 2000.5-2, 2-strand Painted in color RAL 5017 traffic blue Load capacity 2 t Hook path 5000 mm Maximum hook position 4500 mm Calculation basis FEM 9.901 Engine group 2m / M5 Lifting, 2-stage (pole switchable) 1,3 / 5 m / min Lifting capacity 0,4 / 1,7 kW Duty cycle 50% ED Circuits 300 c / h Trolley, 2-stage (pole switchable) 5/20 m / min Trolley travel 0,06 / 0,25 kW Duty cycle 50% ED Circuits 240 c / h Overload protection: Mechanical slip coupling as overload protection. The slip clutch is preset. Hints: The crane system complies with the requirements of the Machinery Directive 2006/42 / EC As well as currently valid UV regulations DGUV regulation 52 (formerly BGV D6). In the event that the action areas of several work equipment for lifting Of loads in a workplace, this is the responsibility of the operator Of a risk assessment. Verification of building statistics: On the customer side, proof must be provided in a verifiable statics, That the crane system (including possibly additional Steel structures) resulting from the ceiling or Hall design can be recorded. This statics must be Test before initial commissioning. Packaging: In order to reduce possible damage due to damage caused by transport, the Packaging of steel components (boom / column (s)) in high quality Shrink film. Hoists and accessories in disposable transport packaging.