ERN 1331, 1024 Impulse

Incremental rotary encoders with integral bearing for mounting by stator coupling Output signal: HTL Max. Sampling frequency: 300.00 kHz Power supply: 10V 30V ... Coupling version: without coupling Shaft: 1:10 taper shaft, functional diameter 9,25mm, Off thread M6 and M10 Degree of protection: IP 40 (EN 60529) Working temperature: -40 / + 100 ° C Electrical connection: Plug, straight, two-row, 12-pin, with Latches and side walls Output Configuration: D297243 Connection direction: cable output usable axially and radially Additional part: without additional part Special features, rotation encoders: Hybrid bearings for electrical Isolation of the shaft connection and additional edge separation test at 160kHz sampling frequency