1st fan position Replacement KXE080-035515-60,
Technische Daten
KXE080-035518-00
| KXE080-035518-00 | Centrifugal fan without motor, impeller with separate |
|---|
| KXE080-035518-00 2 | grease-lubricated bearing mounted on intermediate shaft, |
|---|
| KXE080-035518-00 3 | Drive via flexible coupling. Technical data according to |
|---|
| KXE080-035518-00 4 | data sheet and current dimension sheet (please request if necessary). |
|---|
| Direction of rotation | GR315. |
|---|
| KXE080-035518-00 5 | 2 pieces |
|---|
DMB154-75-023-41
| DMB154-75-023-41 | Low-voltage three-phase AC motor with squirrel-cage rotor, 1785 |
|---|
| DMB154-75-023-41 2 | 1/min, 86 kW, 460VD, 60 Hz, IMB3, IE4, IP55, 3 PTC thermistors, |
|---|
| DMB154-75-023-41 3 | make Lammers. |
|---|
| DMB154-75-023-41 4 | 2 pieces |
|---|
MPU101-000022-00
Surcharge for list 2002
| Surcharge for list 2002 | 2 pieces |
|---|
IOG301-020000-03
| Hinweis | Inspection opening |
|---|
| material | 1.0038 |
|---|
| size | 200x200 mm. |
|---|
| IOG301-020000-03 | Arrangement at 90 °. |
|---|
| IOG301-020000-03 2 | 2 pieces |
|---|
KAG100-100000-05
| KAG100-100000-05 | Condensate drain connection 1 " plug |
|---|
| KAG100-100000-05 2 | 2 pieces |
|---|
SAQ101-000004-00
| SAQ101-000004-00 | Sandblasting SA 2.5 |
|---|
| SAQ101-000004-00 2 | 2 pieces |
|---|
OFQ201-100000-00
| OFQ201-100000-00 | Primer RAL 7040 Derogrund Hydro XT, 40 μm. incl. |
|---|
Accessories
| Accessories | Impeller max. layer thickness of 40μm |
|---|
| Housing surfaces | inside (40μm) & outside (40μm) |
|---|
| Bracket surfaces | inside (40μm) & outside (40μm) |
|---|
| Impeller surfaces | 40μm |
|---|
| Accessories 2 | 2 pieces |
|---|
OFQ203-100000-00
| OFQ203-100000-00 | Top coat RAL 5018 2K Derocryl 70 ST, 40 μm. incl. |
|---|
Accessories
| Housing surfaces | exterior (40μm) |
|---|
| Console surfaces | exterior (40μm) |
|---|
| Accessories | Motor surfaces - 40μm |
|---|
| Accessories 2 | 2 pieces |
|---|
FSZ203-000056-03
| FSZ203-000056-03 | Spigot with flange to DIN 24154 R2, DN 560 made of |
|---|
| FSZ203-000056-03 2 | 1.0038. |
|---|
Coating see fan
FSZ202-045035-03
| FSZ202-045035-03 | Spigot with flange to DIN 24193 R3, AN 450 x BN 355 |
|---|
| FSZ202-045035-03 2 | made of 1.0038. |
|---|
Coating see fan
VEE102-000000-06
| VEE102-000000-06 | Connecting elements on the suction and discharge side |
|---|
| VEE102-000000-06 2 | delivery limit. Set of bolts, nuts and washers between |
|---|
| VEE102-000000-06 3 | duct and expansion joint |
|---|
| VEE102-000000-06 4 | Expansion joint and flange on the fan |
|---|
| Version | 1.0226 |
|---|
| VEE102-000000-06 5 | 2 pieces |
|---|
Deutsch
English