Vacuum Conveyor VS250

ATEX-certified, consisting of: Multijector Vacuum pump G1260 - multi-stage nozzle system for efficient generation of the conveying air - small, compact, quiet – directly integrated in Vacuum Conveyor (no loss of vacuum) Suction air flow / max. vacuum: 4988-5863 lN/min / -91 kPa Compressed air consumption at 4-6 bar: 938-1302 lN/min, feed supply Ømin. 3/4“ (average consumption approx. 30 % lower due to cyclic operation) Compressed air quality: dry, clean, oil-free With exhaust air silencer (< 76 dB(A)) Materials (non-product contact): anodized aluminium, brass, nitrile-gaskets - 2 litre GLA (filter cleaning) Receiver/separator system VS250 - modular, patented receiver vessel - easy to dismantle and clean –without tools Materials (product contact): Stainless steel AISI 316L, finished, Ra < 0.8 μm Wall thickness: 1.5 mm Filling volume: 5.5 litres (per suction cycle) Gaskets (product contact elastomers): Silicone Filter Ti07-OF200 - surface filtration, for superfine dusts < 5 μm, efficient filter cleaning, washable - “no tools required”, patented QX-mounting system for quick exchange - with air shock filter cleaning (GLA) Filtration class: L&M Material: electrically dissipative polyester carrier with PTFE membrane, PUR, SS 316L filter cartridge Ø 112 x 200 mm, open folding, cylindrical - 2 filters Suction port option - radial, for cohesive and bridging powders Øo 2“ Extra filling volume extention - increase to 11,4 litres Product discharge - generously dimensioned flap valve diameter for a quick & complete emptying - valve plate pivots downwards and opens the complete discharging area - valve actuator is located outside of the product contact area Discharging diameter: Ø 160 mm Actuator (outside): L/L, NO(non-pressurised), anodized aluminium Discharge module with 2 mounting brackets (e.g. for mounting the conveyor in a frame) Discharging aid KV - piston vibrator: high frequency vibration during the discharging cycle - enhances the emptying of bridging and cohesive bulk materials Intensity infinitely adjustable Mounting option - connecting flange, for dust tight mounting on the unit/device which has to be filled - easy removal of the Vacuum Conveyor by clamp-ring connection Flange: ID/OD 250/303 mm, PCD 283 with 8 x Ø 9.5 mm