Butterfly Valve HP 111

Consists of: - Valve Type: High Performance butterfly valve HP 111 Nominal width DN: 300 PN (bolt circle): PN 16 - EN 1092-1 Body material: 1.0619 (GS-C25) Face-to-face dimension: DIN EN 558, GR 20 Head/body flange Housing: F 14 - EN ISO 5211 Mounting flange bracket: F 12 - EN ISO 5211 Bracket design: Standard Form of sealing surface: EN 1092-1 Form B1 Material bearing: 1.4571 cushioned Coating system: CS3 Seat ring material: Inconel Clamping ring material: 1.4408 Disc material: 1.4408 Disc surface: chemically nickel-plated Max. operating pressure: 10.0 bar - depending on temperature and application Shaft material: 1.4418 Shaft seal material: Graphite >/= 99.8% Shaft end design: V=27x28mm / L=28mm Lower housing closure: Screw plug 1.4408 Pressure test: DIN EN 12266 - P10, P11, P12 - Electric actuator type: E160 Rated voltage: 220 - 240 V Voltage type: 1-phase Frequency: 50 Hz Duty cycle: 30% ED Mechanical end stops: fixed Actuating time - electrical: 24.00 s Flange type: F12 / F16 - EN ISO 5211 Shaft mount design: V= 27.00 mm IP protection class: IP 67 Corrosion protection/colour housing: RAL 9005 deep black Layer thickness housing (approx.): 80 μm Digital feedback: 2 limit switches Torque switch: yes Heating: 230 V heating Electrical connection: 4x M20x1.5 Terminal diagram / module system: M71-WS-014-40 Control: Local control // Ebrotronic base board Pl-E71-LC Analogue feedback: Current feedback 4-20 mA / voltage feedback 0-10 V Signal communication: Controller input 4-20 mA / 0-20 mA / 0-10 V