Glanded standard single pump

IPL 25/70-0,12/2 PN 10 Single-stage glanded centrifugal pump in compact inline design with directly flange-mounted three-phase motor and undivided shaft or with lantern and standard motor rigidly connected by coupling (version N). The IPL series is suitable for pipe installation or foundation installation. Brackets are available as accessories. With forced-circulation, bellows mechanical seal independent of direction of rotation and cavitation-reducing plastic impeller. Flanges with pressure measurement connections R 1/8. Pump housing and lantern are cataphoresis-coated. The motor terminal box can be made of metal or plastic. If a metal terminal box is absolutely necessary, order the corresponding special version at . Operating data Pumped liquid: Water 100 % Media temperature: 20.00 °C Requested volume flow: Requested delivery head: Min. medium temperature: -20 °C Max. Media temperature: 120 °C Min. ambient temperature: -15 °C Max. Ambient temperature: 40 °C Maximum operating pressure: 10 bar Minimum efficiency index (MEI): ≥ Motor data Motor efficiency class: IE2 Mains connection: 3~400V/50 Hz Voltage tolerance: +-10 % Rated motor power: 0.12 kW Rated speed: 2,875 1/min Rated current: 0.38 A Power factor: 0.75 Motor efficiency 50%: 50.1 % Motor efficiency 75%: 57.4 % Motor efficiency 100%: 60.8 % Insulation class: F Protection class: IP55 Motor protection: No Materials Pump housing: 5.1301/EN-GJL-250 Impeller: PP-LGF50 Shaft: 1.4021 Shaft seal: AQ1EGG Lantern: 5.1301/EN-GJL-250 Installation dimensions Suction-side pipe connection: G 1½, PN 10 Pressure-side pipe connection: G 1½, PN 10 Overall length: 180 mm