Pneumatic control valve Type 3241-1

Hydrostatic strength test: DIN EN 12266-1, test P10; hydrostatic strength test test pressure: 60.0 bar; hydrostatic strength test duration: 1.00 min; seat leakage test: DIN EN 60534-4 leakage class IV, test medium gaseous, test method 1; test pressure seat leakage test: 4.0 bar; leakage test to the outside with air: DIN EN 12266-1, test P11; test pressure leakage test to the outside with air: 5.0 bar; functional test: DIN EN 60534-4; Consists of: - Globe valve Type 3241 Standard: DIN; Nominal size: DN 150; Nominal pressure: PN 40; Body material: 1.0619; Body connection: Flanges; Body connection type: B1 DIN EN 1092; Characteristic: Equal percentage; Flow direction: Opening (FTO); Flow coefficient Cv: 190; Flow coefficient Kvs: 160; Leakage class: IV; Plug sealing edge: Metallic; Plug material: 1. 4006+QT / 1.4008; Plug stem material: 1.4401 / 1.4404; Seat material: 1. 4006+QT; Seat sealing edge: Metallic; Stroke: 30 mm; Valve bonnet: Standard (STD); Bonnet material: 1.0619 / 1.0460; Body gasket material: Graphite sealing ring with metallic carrier 1.4401/1.4404; Packing: PTFE; Packing design: Standard; Packing spring material: 1.4310; Connection diameter: Ø 30 mm; Fail-safe position for actuator: Opening and closing; Seat bore: 100; SAM001 - Pneumatic Actuator Type 3271 Operating stroke: 30 mm; Fail-safe position: Closing; Actuator area: 750 cm²; Actuator stroke: 30 mm; Spring assembly: Standard spring assembly; Actuator connection: SAMSON; Diaphragm material: NBR; Actuator housing material: 1.0976 / 1.0982; Actuator pneumatic connection: G ⅜; Supply air connection quantity: 1x; Exhaust air connection quantity: 1x; Actuator control medium: Air; Material of connecting clamps: 1. 4301; Actuator bench range: 1.9 to 3.1 bar; Actuator operating range: Corresponds to bench range; Actuator stem material: Stainless steel; Actuator type: Pneumatic; Actuator version: Type V2; Fail-safe action: Actuator stem extends; Housing version: Standard housing; Ambient temperature range: -35...90 °C; SAM001 - Electropneumatic positioner type 3767 Pneumatic connection type: G ¼; Electrical connection type: Plastic cable gland; Electrical connection size: M20 x 1.5; Electrical connection colour: Black; Reference variable: 4...20 mA; Housing material: Aluminium; Ambient temperature range: -20...80 °C; Protection rating: IP 54; Kvs outlet: 0.15; Kvs inlet: 0.09; Device type: Type 3767 - Attachment Unit 4708 Device type: 4708-11 freely pipeable; Setpoint range: 0.5 ... 6 bar; Housing material: Aluminium & plastic; Filter bowl: Plastic; Ambient temperature range: -25...70 °C; Pneumatic connection type: G ¼; No. of pressure gauges: 1; Pressure gauge: Pressure gauge stainless steel / brass; Pressure gauge scale: bar and psi; Pressure gauge thread: With connection G ⅛; Filter pore size: 20 μm; Kvs outlet: 0.1; Kvs inlet: 0.1 - Mounting unit 4708 Device type: 4708-11 freely pipable; Mounting unit: consisting of:; Attachment: Attachment to actuator, bracket AISI 316L, 1402-0157; Pipework: Metric CrNiMo, screw connection Ermeto or comparable, galvanised steel - Hook Up Wiring diagram: 0101; Thread type: G-thread; Tubing: Metric; Tube material: 316/316L; Fitting: Ermeto; Fitting material: Galvanised steel - Mounting unit for type 3766/3767 Mounting: IEC_60534_6 (NAMUR); Mounting unit: consisting of:; Mounting kit: NAMUR rib, stroke 7.5...60 mm, lever N1 (1400-6787); Pipework: Metric CrNiMo, screw connection Ermeto or comparable, galvanised steel