PNEUMATIC LIFTING SYSTEM, Model "PN ERGO-PN160"

for rail fixing, with the following specifications: - max. lifting capacity kg. 160 - Net capacity kg. 100 - arm length 2435mm. - pantograph arm configuration standard - working travel mm. 1716 - max. lifting speed 30 m./min, - max. lowering speed 30 m./min. - min. air feeding pressure 6.5 bar - noise level < 70 Db N.B. Dry, non lubricated air (reference regulation ISO 8573.1: quality classes 3.4.2) Load lifting and balancing is carried out by means of parallelogram arm driven by a pneumatic cylinder The system will include the following: - SUPPORT COLUMN, height 610 mm to support the parallelogram arm complete with plate for rail fixing. - PRESSURE REGULATOR to limit max manipulator weight capacity; - PNEUMATIC CALIPER BRAKES equipped with safety spring. They are placed on column and arm joints and automatically intervene in case of air power failure. - ROTATION UNIT for a cont. load rotation on the "Z" axis with PNEUMATIC BRAKE; - MECHANICAL STOP to limit the pantograph arm rotation on the middle axis; - MECHANICAL STOP to limit the pantograph arm rotation on the column axis; (Standard rotation - 360°) - PNEUMATIC BRAKE to block the vertical stroke of the pantograph arm; - MECHANICAL STOP to limit the vertical stroke of the pantograph arm; (Down and up stroke limitation) - PNEUMATIC MICRO SWITCH inhibiting gripper opening and piece release when the manipulator is at downstroke end; - PRESSURE BOOSTER to maintain the operating air pressure at 6,5 bar; - FRAME for rail for PN model suitable for being mounted onto a pair of monorails. (Sliding trolleys not included). - PNEUMATIC DEVICE for the translation of the manipulator PN ERGO on ceiling rails. SPECIAL WOOD PACKAGING 1,00 Stk DE.DIV VARIOUS Pneumatic 'kit' for PN ERGO rail application. N. 2 limit switches (one mounted on the manipulator and one mounted at the end of rails) for safety. The line will stop automatically whenever the balancer reaches the end of rails. EXCLUDED : Interface with customer's PLC line'. 1,00 Stk DE.DIV TOOLING SPECIAL TOOLING for gripping and handling CNG tanks with a max weight of 100kg. The tooling is equipped with the following MODULES: - CONTROL BOX COMPLETE WITH LOAD PRESETTING PNEUMATIC DEVICE - ROTATION DEVICE model TILTING (rot. by 90°) for changing load from long side in front of operator, to short side in front Load rotation - PNEUMATIC BUTTON-CONTROLLED - VACUUM LOAD GRIPPING DEVICE Made of: * FIXED SPECIAL VACUUM FRAME * PUMP mod. VENTURI capacity 11 m3/h complete with air filter, regulator for pressure adjustment, electrovalve, restraint valve, (to be assembled directly on tool). * N. 2 INDEPENDENT VACUUM CIRCUITS for higher safety. - N. 1 HANDLE mod. "RING SHAPED", complete with: * SWITCH for lock/unlock brakes of the joint of the arm; * buttons for gripping and load commutation; * buttons for slow lowering and release of load. 1,00 Stk DE.DIV STRUCTURE PAIR OF MONORAILSsuitable to be mounted on your steelwork complete with: - n. 2 KBKII-L monorails lenght 11 m; - suspensions for the attachment to your I beams; - trolleys for the frame translation; - saddles and cable-holders; - various accessories.