STAHL CraneSystems single-girder overhead crane EH-A 25 - 6,000 E

Track center distance 6000 mm Lifting height 6.00 m Lifting speed 2,00 / 8,00 m / min 0,90 / 3,80 kW 17/33% ED Katzfahrgeschw. 2.5 / 10.0 m / min 0.07 / 0.32 kW 20/40% ED Kranfahrgeschw. 10.0 / 40.0 m / min 2x 0.09 / 0.37 kW 20/40% ED Crane bridge: Crane beam as rolled section according to DIN 1025, part 3 Deflection: max. 1/500 of traffic load and carrier weight STAHL CraneSystems head carrier pair HL08-14090- BA20000K0000-E Head support made of rolled sections with articulated bearings Drive units, wheels made of wear-resistant Materials, life-lubricated rolling bearings and non-slip screw connection to the crane girder Hoist: STAHL CraneSystems electric chain hoist STD5025-8 / 2 2 / 2-2 Payload 2500 kg Classification hoist M4 Chassis: electric trolley normal height Painting: Crane bridge and head support with top coat polyurethane 70μm, Color RAL 1006, corn yellow Crane drive with top coat polyurethane 80μm, color RAL 7021, black gray Hoist with top coat polyurethane 80μm Top coat hoist in color RAL 7021, black gray Top coat finishing cap in color RAL 6018, yellow-green Electrical: Operating voltage 400 V Control voltage 48V Frequency of the system 50 Hz Degree of protection IP54 Contactor control as a split control in separate Equipment boxes on hoist and crane bridge, including transformer and Main contactor. Power supply along the crane bridge via cable car track Service: Control unit type STH, regardless of the position of the Hoist movable along the crane bridge in Towing trolley WA23 Travel limit switch on both sides with pre-shutdown (crane) • Standard documentation according to Machinery Directive (German)