Electromagnetic diaphragm dosing pump, type LMI AD863-848N2

max. delivery flow 7,6 l/h, min. delivery flow 13 ml/h, max. stroke volume 1,06 ml, min. stroke volume 0,21 ml, max. stroke frequency 120 strokes/min, min. stroke frequency 0,02 strokes/min, max. operation pressure 17,3 bar, power supply tension 230 VAC, 50 Hz, connection: DIN plug, average power consumption 20 W, hydraulic flexible connections suction and discharge line for hose 0.375"OD mm. Manual control by linear adjustment of the stroke frequency and stroke length.External pulse control by volt-free contact with integrated control pulse division/multiplication (from 1 to 999). The stroke frequency is then set by external pulses, for example from a water meter. Direct external proportional control by 4-20 mA analogue signal (direct or indirect response). The amount of product injected is proportional to the intensity of the input signal in mA. • Power supply output (24 VDC) for connection of accessories such as a flow monitor• Remote on/off• Possibility of connecting a level switch (optional accessory) to monitor the product transfer operation• Possibility of connecting a Digi-Pulse™ flow monitor to monitor the flow rate automatically and trigger an alarm if there is a fault. Materials: Liquid end housing PVC, connectors PVC, valve housing PVDF, valve balls ceramics, diaphragm AFLAS, O rings Aflas. Drive unit PP, fibre glass strengthened, protection IP 65. All electronic components are being protected against corrosive atmosphere by complete synthetic resin enclosure.